OT Banner Slider

HomeПолезноеCauses for Sewer Clogs and Replacement Options

Each of the plumbing fixtures, drains, and pipes in your house are attached to the biggest (and most important) piece of plumbing in your complete home - the main sewer line.


Between improper use of these fixtures, drains, and pipes and many other outside factors, the primary sewer line can take a defeating. Eventually, the primary sewer collection can become clogged (or even collapse) to the stage of needing serious repair or even replacement.


Knowing what causes sewer lines to clog and the warning signs to look out for can help prevent you from ever having to deal with a major repair or replacement.


Common Causes of a Clog:

Nearly every homeowner has run into the unfortunate situation of having a clogged drain or a slow-running sink or bathtub. Whilst a single clog can become a pain, it’s typically easy to fix.

Nevertheless, what happens if all the drains in your house get started backing up at once?


It can be a sewer drain clog. The repair or replacing an entire sewer line (or even only a section) may also be required when drain clearing efforts don’t work. Listed here are the main indicators that a repair or replacement procedure is required:


1. Severe Pipe Damage

When sewer pipes are broken or ruptured, the sewage won’t be able to properly drain through the system—leading to immediate and frequent backups. Frequent causes of sewer tube damage include:


  • Sewer tube rupture due to changing soil, settling, increased traffic on the ground above, or use of heavy construction equipment above floor.

  • Corrosion of an older pipe, leading to the tube to break or fall.

  • Leaking joints where the finalizes between sections of tube have broken, allowing normal water and sewage to escape.

2. A Sagging Sewer Line

While this is out of a homeowner’s control, sagging sewer outlines happen over time. This particular “bellied” pipe occurs when a section of the tube has sunk due to ground or soil conditions.


The low spot in the line will get started to gather paper and waste - resulting in repeat blockages.


3. Tree Root Infiltration

Older sewer outlines were sometimes constructed out of clay or other porous materials. In addition, the connections between the tube sections weren’t as limited as today’s PVC pipes.


As tree and shrub roots grow, they lookup for sources of normal water. When they latch onto a sewer pipe, they will grow into the tube in order to reach the water inside. As the roots expand over time, it can cause the line to break.

4. Flushing Objects Down the Toilet

In the interest of your plumbing system’s health, it’s important to really know what you can and can’t flush down your toilet.


Treating your toilet as a trashcan will cause sewer empty issues. The number one rule to remember when flushing the toilet - make sure only human waste and toilet paper decreases.


5. Grease & Oils

Grease, fats, and essential oil are all some of the largest culprits when it comes to clogging outlines. It’s NEVER smart to fill grease, oil, or other fats down a drain.


Always pour hot grease into a coffee can or jar. Once it solidifies, you can toss it away. People wrongly feel that running hot water when pouring grease down a drain helps rinse it away. This is not the case.


When grease cools off, it will harden and stick to your pipes—leading to sewer line clogs. To be sure you never run into problems, educate yourself on things you shouldn’t pay your garbage disposal or drain.


How To Know if You Have a Sewer Line Issues

When you’re concerned about getting your sewer line fixed before it’s too late, we’ve gathered four caution signs you should look out for:


1. Frequent Back Ups in Your Drains

Our advice to you is usually to steer clear of liquid “drain cleaner” in addition to call an expert to examine out that backed-up drain! If you have a drain that constantly blocks, especially in the minimum of your home, it could come from a break or blockage in your current sewer pipe.


2. Several Plumbing Fixtures Are Clogged

A person aren’t sure if the toilet or shower drain keeps clogging as a result of an individual pipe blockage or even as a result of a sewer line issue. However, a very clear sign of a sewer line issue is usually when more than one plumbing fixture backs up concurrently.


3. When you use Plumbing

The next factor to consider when you suspect a sewer drain clog is any unexpected or unusual reactions when making use of plumbing fixtures. You might have a problem if:


  • Flushing the toilet causes normal water to compliment from your tub or shower.


  • Toilet water starts to bubble. Ought to this happen, run water in the sink nearest the toilet for a minute roughly. If the water continues to rise, then it’s not a fluke.


  • Hearing a gurgling noise as the toilet flushes or the water in your bathtub or even shower is draining. When you hear this, make contact with your local plumber.


4. Changes Appear in your Yard

A sewer line typically extends from your current home, through your front lawn, and into the city’s sewage system. Brain outside and see if you can notice any of these becomes your yard:


If you have a break in your sewer line, you’ll see an indentation in your lawn.

If you look for a soggy patch of grass in order to hasn’t rained or snowed recently, it might be sewage from a broken sewer pipe.


Sewer Line Fixes as well as Replacement Options

Although some drain cleaning in addition to maintenance tasks can be safely performed by a homeowner, sewer line restoration and replacement tasks ought to always be performed by way of a certified, professional plumber.


Video Sewer Inspection

By employing an in-line video inspection digital camera, it is possible to see wherever the condition lies and experience faster and fewer costly repairs. Here’s how it works:


  1. Images captured with the digital camera are transmitted to a device operated by the digital camera technician. These images are usually recorded for further review.

  2. At the same time, a radio transmitter around the camera records the physical location of the clog and its depth from the surface, therefore the appropriate repairs could be properly planned in addition to implemented.

  3. Once it’s determined a sewer line must be repaired or replaced, there are usually a few options to choose from.


Standard Sewer Line Repair or Replacement

The traditional restoration or replacement is typically performed by using a backhoe to be able to dig up the area encircling the line, allowing effortless access to the condition region. Once the repair is usually made, the backhoe is used to refill the region.


This option may be the only option at times, depending on the condition of your current pipes, their configuration, or even where you live.


Trenchless Sewer Line Repair

Trenchless repairs involve making small access holes wherever the damaged pipe starts and ends. A new pipe is then pulled through the present water pipe, which bursts the aged pipe into pieces whilst simultaneously laying new water pipe.


Trenchless repairs cause less damage to yards in addition to driveways than traditional restoration methods because only the dirt at the start and conclusion of the line is disturbed.

Sewer Experts - Professional and Affordable Plumbers in Denver

No matter what choice you eventually choose, the work needs to be completed by an experienced and accredited professional plumber. Sewer Experts have been serving the Denver area with unparalleled plumbing services. When you’re having a sewer or drain issue, all of us guarantee we can detect and fix it—often the same day!